Digital Air Purifier with HEPA Filter | Disinfection Machine | Antibacterial Sterilizing

Description

Digital Air Purifier with HEPA filter | 6-Layer Filtration System

Specs:
Dimensions: 405 x 238 x 610 mm
Weight: 5.4 kg
Scope: 35 – 50 m3
Voltage: AC 220 – 240 V
Current: 0.17 A
Power: 40 W
Cable Length: 130 cm
Accessories: remote control x1

– Has 6 layer filtration system to improve smell and air quality
1. Primary Filter
2. Cold Catalyst
3. Cellular Activated Carbon
4. UV Ion Sterilizer
5. PM 2.5 Filter
6. HEPA Filter

– Has HEPA Filter to remove dust, pollen, mold, bacteria, and airborne particles

– Has 6 buttons:
1. Wind Speed (choose from General, Quiet, High Efficiency Mode)
2. Air Purification
3. Smoke Removal
4. Timer (choose from 4 timing options: 2H, 4H, 6H, 8H)
5. Anion (negative ion deodorization)
6. On & Off

WARNING

1. Do not let this product touch water, or plug/dial the plug/dial the plug by hand.
2. Do not clean or spray this product with water, liquids, detergents or any flammable substances.
3. Do not block the intake and outlet.
4. Do not use power extension cables unless approved by local authorities.
5. Do not use this product when it is damaged.
6. Do not attempt to dismantle, repair or refit equipment.
7. If you do not use this product for a long time, please unplug the power cord.
8. Do not use this product in the environment wher the temperature changes greatly.
9. If the product emits abnormal sounds, burning gas, smoke, please remove the power plug in a safe way immediately, and contact the technical support center.
10. If the plug is not suitable for the socket, please contact the qualified person to install the appropriate power socket. Do not change the plug or use the adapter plug at will.

SAFETY PRECAUTIONS

1. According to the voltage marked on the nameplate, ensure that the power plug is connected to the correctly designated power outlet.
2. How to damage the wire must be replaced by the manufacturer or qualified service agent.
3. Make sure that the power socket is connected properly, and the plug will not run under load and heat.
4. Make sure that the product and adjacent walls or articles are at least 20 cm away, and that the upper outlet is at least 30 cm away.
5. We can only use our original filter which is specially designed for our products. We must not use any other filter. Do not push, touch, squeeze, impact or insert sharp objects anywhere in this product.
6. Cut off the power supply before cleaning or maintaining the product.

INSTALLATION GUIDE

First use

1. Read the instructions carefully and keep them for future references.
2. Remove all packaging and clean all removable parts with soft dry cloth.
3. Place the product on a dry, stable and smooth level and ensure that it provides a reasonable space of not less than 20 cm for normal operation.
4. Before inserting the plug, please check the power outlet and extension line to confirm that it meets the product requirements.
5. When using the negative ion function of this product, under extremely quiete conditions, there will be a slight “ziz” sound, which is a normal phenomenon, because the negative ion generator is working, releasing a large number of negative ions.

OPERATIONAL INSTRUCTIONS

Connect the product to the appropriate power outlet and be ready

1. Turn on/off

Start-up: Light press remote control to start/key start products. The products will run at medium wind speed by default every time they start products.

Shutdown: Press on/off again to turn off the running product.

2. Wind Speed Selection

Choose the required wind speed by mode

1) General mode operation: When the flow of people is small, it is recommended to choose medium wind speed.

2) Quiet mode operation: low wind speed is recommended

3) High-efficiency mode operation: When indoor pollution is large or people flow is large, it is recommended to select high-grade wind speed.

3. Timing Settings

Timing has four time choices; 2H, 4H, 6H and 8H. Indicator lamp corresponds to the corresponding time.

4. Negative ion switch, after the key, the negative ion indicator lights up.

CLEANING AND MAINTENANCE

1. Please unplug the power supply before cleaning the filter.
2. Clean product fuselage

Use soft dry cloth to clean the dust and Egyptian stains on the surface. Tip: If the contamination is serious, use wet cloth to gently erase the surface, but do not use rough materials.

3. Clean product inlet and outlet

Use a soft brush to remove dust accumulated in and out of the tuyere.